Model: square soft packing 3V lithium battery/lithium manganese battery
(Li-MnO2)/CP9V/CR9V/CR9V/P/U9VL-JP/9V 1200mah battery
Battery type: square soft packing 3V lithium battery
Battery system: lithium manganese battery (Li-MnO2)
Battery type: CP164248
Nominal voltage: 9.0V
Nominal capacity: 1200mAh
Operating temperature range: -20 DEG C, ----60 DEG C
Storage temperature range: -40 DEG C, ----60 C
Maximum continuous discharge current: 150mA
Maximum pulse discharge current: 300mA
Battery terminals: nickel (-), stainless steel or nickel (+) lugs
Storage life: 10 years
Main points of flexible packaging lithium manganese battery
Flexible package structure design, special negative electrode structure design, self sealing
diaphragm: improve battery safety;
Special raw material pretreatment: improve battery storage and comprehensive performance;
Continuous coating technology: improve battery performance, consistency and reliability;
Special electrolyte formula: improve battery environment, adaptability and storage
performance;
HRL coating technology: improve battery safety performance and storage performance;
Battery integrated design technology: to ensure the highest safety performance of batteries,
comprehensive design of the performance;
Large capacity flexible packaging lithium manganese battery technology: improve battery
composition, group consistency;
Hybrid battery technology: both high specific energy and high pulse current performance.
Safety Test
No.
|
Item
|
Testing Conditions and Method
|
Standard
|
1
|
Short-circuit
|
A battery is short-circuited for 1 hour at
0.04Ω.
|
UL1642
No explosion, no fire
|
2
|
Heat shock
|
The cell is placed in a thermal chamber. Temperature is raised to 130±2ºC at the rate
of (5±2ºC)/min and held for 10 minutes, then cooled to room temperature at the rate of
5±2ºC/min.
|
UL1642
No explosion, no fire
|
3
|
Humidity and heat test
|
A battery is placed in a box for 48 hours where the temperature is 40ºC±2ºC and the
relative humidity is 90%95%
|
UL1642
No explosion, no fire
|
High and low temperature test
No.
|
Item
|
Testing Conditions and Method
|
Standard
|
1
|
High
Temperature
|
A battery is placed in an oven for 2 hours at
55ºC±2ºC, then discharged at a 1mA current to the termination voltage.
|
Discharge 90 percent of the original capacity.
|
2
|
Low Temperature
|
A battery is placed in a thermal chamber for 2 hours at -10ºC±2ºC; then discharged at
1mA to the termination voltage.
|
Discharge more than 45 percent of the original capacity.
|
CR9V 1200mah Limno2 battery picture:
Drawing: